What makes FuseTech plates different?

Traditional CCO wear plates, or chromium carbide overlays, typically feature a rough surface with visible weld beads and cracks. In contrast, a FuseTech plate is engineered with a naturally smooth, crack-free finish and consistent thickness. This improves flow efficiency and wear performance, especially in high-throughput or material-handling environments.

What are the surface advantages of a FuseTech plate?

Conventional chromium carbide overlay plates often suffer from material build-up due to their uneven surface and weld ridges. A FuseTech plate, by comparison, features a smooth, non-stick surface that reduces carry-back and blockages. This means better material flow, easier cleanout, and less downtime in wet or sticky applications.

How is a FuseTech plate manufactured differently?

While standard CCO wear plates rely on multiple weld passes that leave behind irregular surfaces, FuseTech wear plates are produced using an advanced single-pass welding method that fuses high-chromium alloy powder onto mild steel. This controlled process results in a naturally smooth and consistent surface without the post-grinding often required by conventional chromium carbide overlays.

How does a FuseTech plate perform under wear and impact?

FuseTech plates deliver superior performance by combining strong sliding abrasion resistance with enhanced impact toughness. Unlike many traditional CCO wear plates that may crack or chip under heavy load, the refined microstructure of a FuseTech plate ensures better durability and longer service life in harsh, high-impact conditions.

What are the benefits in cutting, nesting, and installation?

With conventional CCO wear plates, visible weld patterns often limit cutting flexibility and nesting efficiency. FuseTech plates eliminate this problem with a smooth, non-directional surface, making them easier to cut, nest, and install. This helps reduce waste, simplify fabrication, and optimize material use across projects.

How is the wear performance of a CCO plate tested?

One of the most common methods is the ASTM G65 dry sand/rubber wheel test, which measures material loss under controlled abrasion. This test helps compare different wear plate materials on a consistent basis. At Fusetech, our plates are tested both in-house and externally through reputable laboratories such as ATTAR and TUNRA Bulk Solids. These tests provide reliable data to validate the plate’s wear life and ensure consistent performance in the field.

FuseTech Updates

Stay up to date with FuseTech news, technical insights, product developments, and industry updates. This is where we share new blog articles, practical wear solutions, and the latest thinking around smooth CCO wear plates, mining applications, and performance in high-wear environments.

Open-pit iron ore mine highlighting future Wear Plate applications in mining operations

The Future of Iron Ore: What It Means for Wear Plate

The future of iron ore is changing, but perhaps not in the way many expected. China is approaching peak steel

QME commodity outlook panel and Liebherr mining equipment display highlighting asset reliability and predictive maintenance in Queensland mining.

QME Reflections: Wear Plate Reliability and the Shift From Reactive Repair to Predictive Maintenance

Just back from an informative week at the Queensland Mining & Engineering Exhibition (QME), catching up with customers and having

FUSETECH International team at CIM Connect 2026 presenting wear plate technology for Australian and Canadian mining markets

Weld Overlay Plate Technology Across Australia and Canada: Reflections from CIM Connect 2026

A weld overlay plate can solve the same wear problem in two mining markets, but the way people understand its

Chromium carbide overlay liners installed inside a chute to reduce material hangup and improve flow

Why Material Hangup Is Costing You More Than You Think

Walk into almost any bulk handling operation, a coal port, a cement plant, a hard rock mine, and you’ll find

Hardfaced Steel Plate used in mining chutes and hoppers to reduce premature liner wear

Why Hardfaced Steel Plate Fails Prematurely in Chutes and Hoppers

Early Failure Is Rarely Just a Material Problem Hardfaced steel plate is widely used to protect chutes, hoppers, transfer points, and

Mining workers inspecting chute wear liner installation in a bulk material handling transfer point

Stop Unscheduled Wear Liner Changeouts in Chutes and Transfer Points

A high-performance wear liner is not just a replaceable plate inside a chute or transfer point. It is part of

Mining chute handling mixed wear conditions including abrasion, impact, sticky ore, and material build-up

Introduction: Why Hardness Became the Default Metric — and Why It’s Misleading

In mining and mineral processing, hardness is often the first number people look at when selecting a wear plate. It’s simple,

FuseTech booth at CIM CONNECT 2026 showcasing CCO wear plates

Meet FuseTech at CIM CONNECT 2026

FuseTech will be exhibiting at CIM CONNECT 2026 at the Australian Pavilion, and we look forward to connecting with mining professionals across

High-magnification micrograph showing the superior microstructure of FuseTech M30 wear plate, with hard carbides evenly embedded in a durable matrix.

What Really Determines CCO Wear Performance?

Hardness is often treated as a defining benchmark for wear resistance, but in reality, it is a simplification, and in

Smooth surface wear plate designed for reliable material flow and stable wear life in demanding mining applications

Is a Smooth Surface Only Cosmetic?

At first glance, a smooth surface wear plate looks… well, better. But the real question is whether that smooth finish delivers

Warehouse with stocked wear plates in multiple grades and sizes, ready for fast delivery.

What to Look for in a Reliable Wear Plate Supplier

1.Introduction: Why Choosing the Right Wear Plate Supplier Matters Wear plates are essential components in mining machinery, engineering equipment, bulk-handling

Heavy-duty wear resistant alloy liner for bucket and chute use

Top 6 Common Mistakes When Selecting Wear Plates—and How to Avoid Them

Selecting the right wear plate is never as simple as checking the hardness value or the price tag. In the